6. Sub Groups And Panning

5. Equalization

Moog Mother-32

The Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration.

Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.

• Semi-Modular design requires no patching for swift, inspired music creation

• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations

• Low Pass & High Pass Moog Ladder Filter (20Hz–20kHz) with voltage controlled resonance

• External audio input for processing outside sound sources

• Definitive Moog oscillator with Pulse and Sawtooth wave outputs

• 5-pin MIDI input and MIDI to CV converter

• 32 Modular Patch Points (Includes 5 patch cables)

• 2 Voltage controlled mixers

• Superb companion to Werkstatt 01, Minitaur and other synthesizers

• Main module can be easily transferred into a Eurorack skiff or case

• Mount 2 or 3 units vertically with optional 2 and 3 Tier kits

• Complete solution for new Eurorack users – no other items required

Click here for more info........

Check Price @

4: Setting Microphone Gain for Headroom and Signal-to-Noise Ratio

4. Mic & Line Level Explained

3. Gain Staging & Structure

KORG ms-20 mini & ms-20m

Vermona Kick Lancet

Vermona Kick Lancet - analog desktop kick drum generator based on the DRM1 MKIII kick channel. Analog oscillator produces sine and square waves, which can be blended seamless from one to the other. Controller: decay, pitch, bend, time, FM freq, FM Int, attack, noise, wave and balls. Trigger: MIDI, switch trigger, audio trigger, gate voltage (dynamically).

Check Price @

Nuendo 7

Ableton Live Update 9.5

Click here for more info.......

Ableton Push 2

Push is an instrument that puts everything you need to make music in one place—at your fingertips.

Making music is hard. To stay in the flow, you need to be able to capture your ideas quickly, and you need technology to stay out of the way. Computers make it possible for one person to create whole worlds of sound. But instruments are where inspiration comes from. Push gives you the best of everything. It’s a powerful, expressive instrument that gives you hands-on control of an unlimited palette of sounds, without needing to look at a computer. Click here for info.........

1. Cable & Wiring

The best way to understand the difference between balanced and unbalanced cables to think in terms of signal separation.

BALANCED CABLES

A balanced cable has three wires, one for ground (earth), one for the positive (hot), and one for the negative (cold).

Common Balanced Connectors

The two most common balanced connectors are XLR and TRS.

XLR Connectors:

In the case of an XLR cable, the three wires are called, X (ground), L (left, hot) and R (right, cold). There are both male and female XLR connectors.

Pin 1: Shield (G)
Pin 2: Hot (L)
Pin 3: Cold (R)

 

XLR Connectors

TRS Connectors:

TRS is the abbreviation for Tip (Left), Ring (Right), Sleeve (Shield, Ground). Although it may look like a standard 1/4" (6.35 mm) or 1/8" (3.5 mm) phono plug, it does have an extra ring on its shaft. TRS cables have two conductors plus a ground (shield). A TRS cable can carry either a balanced mono audio signal or an unbalanced stereo audio signal.

TRS Connector

How Does Audio Transmitted in Balanced Cables?

The audio signal is transmitted at the source on both the positive (L) and negative (R) lines, but the voltage in the negative (R) line is inverted (i.e. the polarity is changed). When the signal is positive on the hot (L) line, it is negative on the cold line (R). They appear as if they are 180 degrees out of phase. However, it is more technically correct to say one signal has reverse polarity. The signal in the left (R) line is not delayed 180 degrees. It is only flipped upside down.

Removing Noise at the Destination

It is possible that along the length of the cable, noise is encountered from external sources such as other electronic devices or RF interference. This noise will be identical on both hot and cold lines. When the balanced XLR cable is plugged into the input of other balanced equipment, the cold (R) line is inverted again. Now the two audio signals in both hot (L) and cold (R) lines are identical in every way. However, the noise that was introduced along the way is now inverted on the R line. When the L and R signals are combined at the destination, the inverted noise on the R line is combined with the original noise on the L line, they cancel each other out. All that is left is the original audio signal.

Fully Differential Balanced Circuit Design

Most professional audio products provide balanced inputs and outputs through XLR or TRS connectors. In almost all cases, a balanced input signal is internally converted to an unbalanced (single-ended) signal by using a transformer or amplifier. After the internal processing is finished, the signal is converted back to balanced signal and sent to an XLR/TRS output.

A very small number of professional products may exist that use balanced signal from input to output without ever converting it to unbalanced signal. This is referred to as fully differential balanced circuit design. In very critical applications (not home theater), such a design offers better signal integrity by avoiding the extra transformers or amplifiers required for unbalancing and rebalancing. It is claimed by promoters that fully balanced internal circuitry can yield 3dB of additional dynamic range. Don't believe everything that is claimed.

UNBALANCED CABLES

An unbalanced cable has two wires, one for the positive and one that acts as both the negative and the ground. Because the negative wire has to do more work than the positive wire, such a configuration is called Unbalanced.

Common Unbalanced Connectors

The two most common unbalanced connectors are RCA and TS phono jack. Even XLR cables be used for transmitting unbalanced audio. Unbalanced speaker connectors are speakon, and banana plugs.

RCA Connectors:

RCA connectors are associated with the RCA Corporation. Most home audio/video equipment use RCA connectors. They are even used for S/PDIF connections in digital transmission of audio signal.

   

RCA Connectors

TS Connectors:

There are 1/4" (6.35 mm) or 1/8" (3.5 mm) TS jacks. TS is the abbreviation for Tip and Sleeve. One insulator ring separates the tip and sleeve. The tip is considered to be the positive (hot) and the sleeve is the ground or shield is connected. The most common applications of TS cables are in guitar or line-level instrument connections.

1/4" TS Connector



COMPARISON OF TRS AND TS JACKS

TS and TRS connectors look almost identical. Some equipment accept a TS connector in a TRS socket, but it may be a good idea to check the equipment documentation to be sure. Remember that 1/4" TS connectors connect to –10 dBV line level equipment, whereas 1/4" TRS connectors expect a +4 dBu line level (for explanation, see the section below on balanced vs. unbalanced reference voltage levels).

1. Sleeve: Ground (Shield)
2. Ring: Right channel for stereo signals, negative polarity for balanced mono signals, power supply for power-using mono signal sources
3. Tip: Left channel for stereo signals, positive polarity for balanced mono signals, signal (hot) line for unbalanced mono signals
4. Insulating rings

Phone jack connectors are available in 1⁄4" (6.35 mm), 1/8" (3.5 mm), and 3/32" (2.5 mm) sizes. All three sizes are now readily available in two-conductor (unbalanced mono) and three-conductor (balanced mono or unbalanced stereo) versions.

2.5 mm mono (TS), 3.5 mm mono (TS), 3.5 mm stereo (TRS), and 6.35 mm (1⁄4 in) (TRS) phone connectors

If a mono TS plug is inserted into three-conductor stereo TRS socket, the result is that the right channel (ring) of the socket is grounded. The signal from the right channel will be lost. If the grounding of the right channel short circuits the right channel of the amplifier, this could damage the amplifier.

MIXING WIRING CONFIGURATIONS

One Mono XLR Connector to One RCA Connector:

When connecting a 3-pin XLR to one RCA, the negative (-ve) and shield of the XLR are joined together, either at the RCA end or at the XLR end. The end result will be unbalanced.

Stereo TRS Phono Jack to Two RCA Connectors:

When a stereo 1/4" phono jack is used, the left and right parts of the stereo signal are split off to two separate connectors.

One Mono XLR Connector to 1/4" (6.35 mm) TRS Connector:

Normally, the 3-pin XLR is connected to a 1/4" TRS phono jack for balanced mono applications as in the following. This type of wiring will give you a balanced mono connection.

• Pin of XLR to TRS Phono Jack Sleeve
• Pin 2 of XLR to TRS Phono Jack Tip
• Pin 3 of XLR to TRS Phono Jack Ring

One Mono XLR to One 1/4" or 1/8" Mono TS Phono Jack:

When connecting a 3-pin XLR to one mono TS phono jack, the negative (-ve) and shield of the XLR are joined together, either at the phono jack end or at the XLR end, and connected to the sleeve of the phono jack. The end result will be unbalanced.

ADVANTAGES AND DISADVANTAGES

A balanced XLR cable has three major advantages over an unbalanced RCA cable and that is why pro users prefer them.

These are the advantages:

1. XLR connectors are more robust. They do not come loose as easily as RCA cables. Imagine in the middle of a rock concert with lots of speakers, amplifiers, cables, and all the craziness, some RCA cables become loose. You will have a riot. 
2. Because they are balanced and are grounded better, XLR cables are relatively noise free. RCA cables, on the other hand, can drive you crazy with noise and hum.
3. There is a limit on how long you can make an RCA cable (normally below 10 meters) before it significantly attenuates the signal. XLR cables can be as long as a few hundred feet.

Unbalanced RCA cables, on the other hand, have a few advantages:

1. Unbalanced RCA cables are less complicated.
2. They are less expensive.
3. They are readily available in almost all retail stores.
4. Many manufacturers include them with their products.

The biggest disadvantage of unbalanced cables is that they are susceptible to noise problems. In general, hey should be kept as short as possible.

If the signal is unbalanced out of you receiver, it will arrive that way. Using an RCA to XLR cable will not be of any advantage nor will an RCA to a balanced 1/4''. When you use a cable with an unbalanced RCA connector on one side and a balanced XLR connector on the other side, the end result will become unbalanced and you will lose all the advantages of an XLR cable. That is why the use of a converter box such (described below) is recommended.

USING BALANCED/UNBALANCED LINE LEVEL CONVERTERS

Balanced and Unbalanced Reference Voltage:

For consumer audio products using unbalanced RCA connectors, the reference signal level is -10dBV. This is equal to reference voltage level of 0.316 Vrms. 0 dBV is a voltage reference point equal to 1.0 Vrms. Remember that the dB level is a LOG ratio of two voltages.

=20*LOG(0.316/1) ˜ -10 dB

For pro audio products using balanced XLR connectors, the reference signal level is +4dBu. This is equal to voltage reference level of 1.23 Vrms. 0 dBu is a voltage reference point equal to 0.775 Vrms.

=20*LOG(1.23/0.775) ˜ +4 dB

When a home audio equipment with an RCA output is connected to a pro audio equipment’s XLR input, the signal will have to increase by as much as 12 dB. The casual observer would think to convert -10 dBV to +4 dBu, you would need 14 dB of gain. The casual observer would be wrong. You only need 12 dB of gain. The reason is not only do you change levels, you also change reference levels -- from dBV to dBu. The first (dBV) references everything to 1.0 volt, while the second (dBu) references everything to 0.775 volts.

=20*LOG(1.23/0.316) ˜ 12 dB

As soon as you make an unbalanced connection at one end of a wire, the whole thing becomes unbalanced. So for maximum noise immunity, you should use balancing adapters.

Unbalanced lines should always be kept under 10 feet (3 meters) to prevent undesirable effects such as hum and noise. There are balancing transformers available for long runs of cables. For example, if a microphone with XLR connectors is to be connected to a prosumer camcorder, an XLR adapter such asBeachTek or Studio 1 should be used for converting unbalanced outputs to balanced lines, allowing for long runs of XLR cable.

Converter Boxes:

A converter box can solve input/output level problems for level matching consumer and professional audio equipment. For example, if you use an RCA to XLR cable from your receiver/preamp to your amplifier, you will notice a drop of a few dBs. The biggest advantage that XLR offers is grounding and less noise problems. A lot of time, when you connect an RCA device to an XLR device, the level may not be sufficient and you need to increase the output level of the source to match the input level of the destination. For example, I own a couple of pro amplifiers with XLR inputs to power seveal passive subwoofers. I bought two Samson S-Convert boxes to connect the unbalanced line output from the receiver to the XLR inputs on the back of the pro amplifiers.

This is from the Manual: 

Quote:

S-convert provides a convenient solution for matching levels and interfacing audio devices, either on stage or in the studio. The S convert is a specially designed miniature level matching device that allows you to convert stereo –10dBV (RCA) signals like those from consumer CD players and cassette recorders, to +4 dBu (XLR) signals like those from professional mixers, outboard effects processors and DAT machines to name some. The S-convert works in both directions and features male and female XLR connectors for the balanced +4dBu inputs and outputs, along with RCA connectors for the unbalanced –10dBV inputs and outputs. The addition of +4 and –10 LEVEL controls allows you to use S-convert to calibrate your signals to an exact level.

A converter box is not an absolute necessity, but if the pro equipment do not have enough gain "reach", an active interface may be necessary.

In my case, I connected the Samson S-Convert between the subwoofer output on the back of the receiver and the Behringer EP4000 amplifier. The basic procedure is summarized below:

• Connect the sub cable to the RCA input of S-Convert.
• Connect the XLR output of the Samson S-Convert to the XLR input #1 of the Behringer amplifier with a female XLR to male XLR cable.
• Leave the level controls of the Samson S-Covert at the default.

It is amazing what a difference this simple gadget can make. Before I had connected the S-Convert, the Behringer amplifier’s level was set at the midpoint and the sub signal had reasonable sensitivity. With S-Convert, the signal became so much stronger and the subwoofer started shaking the room. I had to turn down the amplifier’s level to around 10%-15%. Afterwards, I tried to calibrate the subwoofers again, I realized the bass output was too loud. I had to lower the sub gain in the receiver’s menu to -4.5dB. Prior to adding the S-Convert, the gain was set at zero.

I highly recommend a converter box for balanced to unbalanced connections. Samson no longer sells the S-Convert. You can buy Art CleanBox Pro or Rolls from Amazon or other pro audio dealers. 

Source Click Here....

2. Software Mixing Explained

Korg TR-Rack

Polyphony - 32 voices

• Tone Generator - ACCESS (Advanced Combined Control Synthesis System): 24 Mbyte PCM ROM, with 375 different PCM multi-samples and 258 drum samples; 128 Z1 sounds in V3 models
• Sound Source - ACCESS (Advanced Combined Control Synthesis System): 32 voices, 32 oscillators (single mode); 16 voices, 32 oscillators (double mode)
• Sampler - Optional Add-On: 8MB Sample Playback, reads Akai and Korg sample libraries.
• Memory - 56 programs/256 combinations for ACCESS, 64 programs for MOSS, additional 256 programs/256 combinations for ACCESS plus 64 programs for MOSS are available when PBS-TRI optional board is installed
• Sequencer - 20 songs, 100 patterns, 1/192 resolutions, 80,000 notes, 16 tracks, reads and writes Standard MIDI File
• Arpeggiator - None
• Keyboard - 61 notes; Pro models: 76 notes; ProX models: 88 notes; All keyboards are sensitive to velocity and aftertouch
• Effects - Stereo digital multi-effect system - 2 master effects and 8 insert effects simultaneously. 14 effects algorithms for master effect and 100 effects algorithms for insert effect
• Control - MIDI (16-parts)
• Date Produced - 1995-1998

Oberheim Matrix-1000

Polyphony - 6 voices
Oscillators - 12 DCO's at 2 per voice
LFO - 2
Layers - Single / Split / Multitimbral
Memory - 800 preset patches, 200 user patches
Keyboard - None
Effects - None
Control - MIDI
Date Produced - 1987 - 1994

E-mu Xtreme Lead XL-1 Turbo

• Polyphony - 128 voices 
• Oscillators - 32MB Sound ROM
• Arpeg/Seq - Rhythmic Pattern Generator/Arpeggiator: 16 arpeggiators (1 per MIDI channel); SuperBEATS Mode
• Filter - 12-Pole Digital Filters
• Effects - 24-bit dual stereo-effects processor
• Keyboard - None
• Memory - 512 ROM & 512 User Presets; 1 additional internal ROM expansion slot (expandable to 3 with Turbo upgrade) for Proteus libraries or create your own custom ROMs using E-mu's E4 Ultra samplers
• Control - MIDI (16-parts, expandable to 32 with Turbo Upgrade)
• Date Produced - 2000

Vintage Synths Video Demo Patches

OBERHEIM MATRIX-1000/MATRIX-6 https://www.youtube.com/watch?v=wM9jt...
ROLAND JUNO-60 http://www.youtube.com/watch?v=GaTLk6...
ROLAND JUNO-106 https://www.youtube.com/watch?v=Gdsuc...
ROLAND ALPHA JUNO https://www.youtube.com/watch?v=v2R1V...
ROLAND JX-3P http://www.youtube.com/watch?v=YCGGao...
SEQUENTIAL SIX-TRAK https://www.youtube.com/watch?v=Wa-Cw...
ENSONIQ ESQ-1/SQ-80 http://www.youtube.com/watch?v=hJbNq1...
KORG POLYSIX http://www.youtube.com/watch?v=Bc0uMD...
KORG POLY-800 http://www.youtube.com/watch?v=K6bG8P...
KORG POLY-800 II http://www.youtube.com/watch?v=fPrp8a...
KORG POLY-61 http://www.youtube.com/watch?v=9R0bva...
KORG DW-6000 http://www.youtube.com/watch?v=cOoF7T...
KORG DW-8000 http://www.youtube.com/watch?v=9Bh_xr...
KORG PROPHECY https://www.youtube.com/watch?v=lllDT...

Denon MC4000 Official Tutorial

Features

• Premium 2-Deck controller for Serato
• Includes Serato DJ Intro; user-upgradeable to Serato DJ
• Touch-activated jog wheels for accurate scratching and track cueing
• Dedicated Hot Cue and sample trigger pads with illuminated feedback
• Long-throw 100mm pitch faders
• Balanced Booth Outputs for local monitor speakers, with independent level control
• Spacious control layout for effortless, optimized workflow
• Dedicated EQ and FX controls on each channel
• (2) Balanced mic inputs with 2-band EQ, Ducking, and Echo effect
• RCA Aux input for external device mixing
• Balanced Main and Booth Outputs
• Pro-grade steel construction ensures long-term durability
• Compatible with Traktor 2 (via .tsi files), Algoriddim djay Pro and Virtual DJ 8

Pic :

Front

Rear

Check Prices @

JoMoX MBase 11

Pics:

Front 
Rear

1. Mixers Explained

Have you ever looked at a mixing board and wondered where on earth to start? It can strike fear into many new producers because of the amount of sliders, knobs, and buttons staring back at you. It certainly did with me the first time I saw one.

But when you look at them in detail, the consoles are actually very easy to follow. Learning about the layout and functions of a hardware mixer can also prepare you for using a software-based mixer, as they use the same principles of signal flow and design which helps to keep things consistent across both domains. 

Click to read more. 

Part 1

Part 2

Part 3

JoMoX XBASE 999 Analog Drum Synthesizer

Specifications
- 9 instruments: Bass Drum, Snare Drum, Hi Tom, Low Tom, Hi Hat, Clap, Rim Shot, Crash, Ride
- Analog kick, toms, snare
- Analog multimode stereo filter with Cutoff, Q, Res and Gain per channel
- LP/HP/BP/Not Mode per channel, 5 routings, VCA Out in mix out
- 5 sample based instruments with analog VCA envelope
- 31 samples per instrument (HH has 2 Samples) per instrument - 186 total
- HH Filter: In the hihat section an extra analog filter may be inserted. Signal source can be wether sample or noise. HP/LP cutoff are adjustable, resonant capable
- LFOs: 2 of which are assignable to different parameters
- Own samples can be uploaded by the Jomox Editor
- Midi: Midi In, Midi Out, Midi Thru
- Inputs: Filter Stereo In
- Outputs: 10 individual outs, stereo mix, headphone
- Output Level: about +4dBu at max. volume on all outputs
- 19 encoders
- Phones Volume
- LCD Display 2x 24 Characters
- 10.5V 2A ~AC external power supply
- Metal steel enclosure
- Wooden end cheeks
- Weight 5kg

Pics:

Front
Rear

Rane Sixty-Four

Rane Sixty Four, software controls are built-in for one or two computers, Includes Serato DJ software, Includes Rane  ASIO and Core Audio Drivers for Serato DJ and other audio programs, Advanced MIDI and audio routing: route any deck to either USB Port, and MIDI follows the audio, Control Library, Cues, Loops and Samples on two computers, 30 controls with 157 unique mappings  for software, Each of the two USB ports supports six stereo record and five stereo playback channels, USB record channels support: Vinyl control signal for four Virtual Decks, or record any one of the four Decks post-fader, Record the Main Mix, Mic 1  or Mic 2, FlexFX USB Insert Send to each computer, USB playback channels support: Playback for four Virtual Decks, FlexFX USB Insert Return from each computer, Great-sounding 32-bit floating point audio sampled at 48 kHz, Pre-fader Level, 3-band isolator tone controls with full cut, Low-pass / high-pass sweep Filter with resonance adjustment, Crossfader, FlexFX and headphone Cue assigns, Proprietary magnetic crossfader with a contour control, Contour control for the channel faders

Pics:

Front
Rear

Novation Audiohub 2x4

Novation Audiohub 2x4, USB 2.0 Audio-Interface with build-in 3-Port USB-Hub, 24-Bit/96 kHz, 2x Line-Inputs RCA, 2x Line-Out 1/4" thomann TRS Jack balanced, 4x Line-Out RCA, Stereo Headphone-Out, Signal/Clip-LEDs, for PC/MAC/iOS 7, 6 (class compliant), incl. Power Supplyl, USB Cable and Ableton Live Lite 9,

Check Price @

Denon DN-X1600 DJ Mixer

• 4-Channel Digital DJ Mixer with Studio Quality Components & Specifications
• Internal 32-bit Floating DSP Processing and 32-Bit DAC Output for best possible sound
• 24 bit 96kHz USB2.0 Audio Interface (Soundcard) 4in/4out (stereo)
• MAC OSX 10.6.4 and 32/64-bit Windows Compatible
• Low latency 32/64 Bit ASIO driver for PC included
• DVS direct mode (CD/Vinyl) for DJ applications using control signal operation (timecode)
• Traktor Scratch Certified (from TSP v126)
• USB MIDI In/Out and 5-pin MIDI Out
• MIDI Clock Function On/Off
• Fully MIDI Mappable with additional focused area of up to 4 MIDI pages by parameter knobs and buttons
• Dual Layer Control Available – MIDI / Normal Audio
• Independent Effector w/14 Effects available:
• Delay, Echo, Trans, Flanger, Filter, Phaser, Reverb, Loop, Rev. Loop, Pitch Shift, Ping Pong Delay, Beat Scratch, BeatBreaker, and Send/Return
• World's first DJ mixer to feature V-Link - Allows DJ performers to simultaneously integrate audio and video control over MIDI via Edirol's V-4/V-8 models
• 2-way EFX Parameter Filter (LPF/HPF)
• Independent EFX Insert for, Channel, Mic, & Master
• Matrix Input Assignment for Line/Phono and selectable USB Audio, Digital Input
• Phono Amplifier with high S/N ratio, equivalent to Denon Hifi products
• Discrete Transistor construction for Mic Amplifier to realize a studio console class’ low noise level (EIN 126dB)
• High sound quality high output Headphone Amplifier
• 45mm Cross Fader (Flex Fader) w/tension adjust
• 60mm custom Alps type Channel Faders
• Fader Contour control for Channel and Cross Fader
• Fader Start function (channel/cross fader)
• Cross Fader assignment function: (A, B, Thru)
• Independent 3-Band Isolator EQ w/Kills (High-Mid-Low)
• Large FL Tube Display w/various indicators for super easy navigation
• Selectable Digital Output (44.1/48/96kHz)
• Balanced/Unbalanced Master Output
• Balanced Booth Output
• 2 Mic Input w/Ducking level and attack time control
• Send/Return control for external effectors
• Extensive Utility Menu to customize user settings
• Preset Import/Export Function by USB memory device (take your settings to another X1600/X1700 mixer)
• Large Capacitor, and large-diameter Winding Wire for Transformer
• Ideal Grounding Construction protecting from external noise

Pic:

Front

Rear

Ecler NUO4

The NUO 4.0 is a 4 channel analogue mixer addressed to professional DJ and installations.

It features the professional characteristics that made its predecessors acclaimed worldwide, and it equips the best analogue components available in the market place in order to obtain the highest performance.

The NUO 4.0 is tailored to any kind of DJ and music style thanks to its versatility and plenty of features, such as the precise and ergonomic full cut EQ, professional FX loop with Send and Return control in pre or post fader mode, faders curve adjustments and suitability for the awarded magnetic ETERNAL crossfader for the professional scratch DJ. Whatever the music style you play, the NUO 4.0 will please all your needs.

Its superb sound quality and robust format, plus two balanced XLR microphone inputs and two balanced XLR outputs for Master and Booth make it also a perfect mixer for installations.

_ 4 mixing channels
_ 4 Phono and 4 Line inputs
_ 2 balanced XLR Microphone inputs
_ Master output XLR and RCA
_ Booth output RCA
_ VU Meter per channel
_ 3 band full cut EQ
_ Extra large ergonomic EQ knobs
_ FX Send control per channel
_ FX Pre/Post fader selector
_ Master FX Send, FX Return and FX PFL control
_ Fully assignable crossfader
_ 60mm long life VCA faders
_ 45mm long life VCA crossfader
_ Fader and crossfader shape adjustment
_ Crossfader Reverse and Cut-In
_ Crossfader suitable for ETERNAL

Pic:

Front
Rear

Basic Chord and Scale Theory

Links worth checking out:

1. Basic Chord and Scale Theory
2. Scale – Quick Composition Trick Using Scale
3. Circle of Fifths Chords Tutorial and File
4. Music Theory, Chords, Composition and Melodies for EDM (7 Tutorials, 3+ Hours!)
5. House Chord Progression Sampling and Theory

Gemini MDJ-1000

• USB input for flash drive
• MIDI capability for use as a software controller
• Slot-in CD-ROM compatible with Audio CDs, CD-Rs, MP3-CDs
• Ethernet LINK functionality for library sharing between up to 4 players
• 4.3” full-color display with large waveform display
• PC/MAC Audio interface (up to 24-bit/192 kHz)
• 8” touch-sensitive jog wheel with LCD display and resistance control
• 4 programmable HOT CUE points for instant track playback points
• 8 selectable instant Auto Loop sizes plus manual loop
• 3 selectable jog modes: Search/Pitch Bend/Scratch Effect with SLIP mode and Reverse
• Stereo RCA outputs and S/PDIF digital audio outputs
• Plays MP3, AAC, WAV and AIFF formats
• BPM functions including auto (sync), manual (tap), and BPM lock
• Variable pitch control with six settings: +/- 4%, 8%, 16%, 24%, 50%, 100% and Master Tempo control
• Start/Stop time jog mode adjustment

Pic:

Front

Rear

Korg Electribe Sampler

The electribe sampler has been reborn with cutting-edge technology inherited from popular KORG products such as the KingKORG, kaossilator, kaoss pad, and taktile. The internal memory lets you save 250 patterns, including preset patterns which are perfect for today's dance music scene. There's also support for the polyphonic playback that’s indispensable for styles that include complex chord progressions, such as House music.

Website...

Pics